IEC 60317 Part 13 is an important rule that guides the production of specialized magnet wire. Shenzhou Cable sticking to this rule strictly, and that ensures good quality of their wire coatings. This text will discuss what IEC 60317 Part 13 is, why the adhesion testing of coating is crucial, how the coatings are produced for magnet wire, test procedure, and how this is a step towards boosting the quality of the coatings on the wire.
IEC – International Electrotechnical Commission This is a global standards association for electrical products and devices. This is actually one of the rules they have: IEC 60317 Part 13, which relates to the adhesion of the coating on the wire so that it does not peel off too easily. The wire has a special type of paint (enamel) covering it. It makes the wire stronger and contributes to its protective features. It is heated until it dries and clings tightly to the wire, which makes the enamel stick. This particular rule ensures that the enamel coating adheres properly to the wire because its intended function depends on it.
We also perform adhesion coating checks to see how well the enamel will stick to the wire. In addition, Shenzhou Cable uses this test to ensure that the enamel coating is good and does not fall off. If the enamel coating doesn’t adhere properly, it may peel off, and so the wire will fail. This is ultimately problematic for the devices that utilize this wire. That is why adhesion testing is super critical! This enables the wire to function properly and not create any trouble.
Magnet wire is a specific kind of wire which is used for essential devices like motors and transformers. So, in order for these devices to function, they require heavy-duty, durable enamel coatings on the magnet wire. IEC 60317 Part 13 ensures that the magnet wire has excellent enamels of stringent quality. By doing so, the company can assure that their magnet wire coatings are on par with coatings manufactured in other countries, and therefore supply their customers with guaranteed products!
IEC 60317 Part 13 Testing Procedures: IEC 60317 Part 13 is a series of tests performed to determine the quality of the enamel coating on the wire. The wire, is heated to a certain temperature. Next, the testers attempt to remove the enamel coating to measure its adhesion to the wire. This purple might require more than just a bit of care to ensure coatings stick well. If it comes off too easily, that means they have to work on the coating.” This thorough testing helps to make sure the wire is safe and effective to use.
This helps to make wire coatings stronger and better, and it falls under IEC 60317 Part 13. Having the enamel coat adhere tightly is what allows the wire to last longer and be more effective. This thirty-second rule is known as the Shenzhou Cable this ensures that the wire coatings are very high quality. Their wire is not only solid, but it also works for a long time without problems.
Modern production technology and strict quality control procedures in our enameled-wire factories enable us to provide products with speed across the globe. Through close collaboration with our logistics partners in the world, we are able to provide tailored logistics solutions to satisfy the needs of various customers. Our global delivery network is comprised of key ports to ensure products arrive at their destination quickly and safely. Our sales team also offers online tracking services that keep our customers up-to-date on the status of their shipments increasing transparency of supply chain.
The high-quality of enameled wire copper is of paramount importance. The factory goes through numerous stages of quality inspection to ensure that the products are in compliance with international standards as well as customer demands. (1) Control of raw materials From pure copper to high quality insulation varnish, the raw materials are rigorously screened to ensure their stability. (2) Whole-process monitoring: From drawing wires to enameling each stage of production goes through rigorous testing, such as tensile strength as well as electrical performance and voltage withstand tests, to guarantee the product's reliability. (3) Complete certification: Quality factories usually have the ability to pass ISO 9001 quality management system certification as well as UL safety certification. SGS certification to increase the trust of the customer.
Our enameled wire factory can customize the products according to customers' special requirements and also provide an extensive after-sales assistance. Diversified specifications: Our factory can produce enameled cables in a variety of specifications including wire diameters, thicknesses of enamel, temperature ratings, and insulation ratings.
Copper wire factories that are enamel can produce high-quality products at a lower price due to their scale production capability. (1) Mass production: The factory is able to respond quickly to the needs of large orders, while at the same time ensure the timeliness of delivery. (2) Cost reduction. Through optimizing the production process and equipment, the factory is capable of reducing waste, increase output, and cut down on unit expenses which allows customers to be more competitive in their prices.
Copyright © Yichun Shenyue Electrical Technology Co., Ltd All Rights Reserved
EN
